ACPI SDM0CU-V & H Series SATA DOM SSD Module is the storage device based on NAND flash memory technology. This product complies with Serial ATA standard interface and suitable for data storage media and code storage device for embedded system and boot disk. By using SATA DOM SSD Module, it is possible to operate good performance for the systems, which have SATA interface. With small form factor, the applicable appliance can add or install SATA storage device on its Mother Board or Complete set.

Features

  • Small form factor with Serial ATA Standard Interface connector.
  • Memory Capacities SLC:

            1GB / 2GB / 4GB / 8GB

  • Memory Capacities MLC:

            4GB / 8GB / 16GB / 32GB / 64GB

  • Compliant with Serial ATA Revision 2.6 specification with 1.5 Gbps/ 3.0 Gbps interface rate
  • Compliant with ATA/ATAPI-8.
  • Build-in Global Wear Leveling and Hardware BCH ECC capable of correcting errors up to 72-bit/1KB.
  • Automatic sleep and wake-up mechanism to save power.
  • Embedded data buffer.
  • High performance and reliability.
  • Noiseless and stable installation to system.
  • Operating voltage 5V operation.
  • Operating as Boot Disk.
  • Support S.M.A.R.T (Self-defined)
  • Sequential R/W Performance:

        SLC Read:  35MB/sec. (max.), Write:  28MB/sec. (max.)

MLC Read:  162 MB/sec. (max.), Write:  40 MB/sec. (max.)

  • Power Consumption < 425 mW.
  • Shock: Operating: 1,500G, duration 0.5ms, half sine wave
  • Vibration: 20G peak, 10~2000Hz with 3axis
  • Humidity:0°C~55°C / 95% RH, 10cycles
  • Operating Temperature: Standard Grade: 0°C ~ +70°C, Industrial Grade: -40°C ~ +85°C
  • Storage Temperature:-55°C to +95°C
  • Fully Compliant with RoHS directive
  • CE and FCC Compatibility 
Model Name SDM0CU-(V/VT/HL/HR/HLT/HRT)
SDM0CU-(VM/HLM/HRM)
NAND Flash Type SLC/MLC
Interface SATA II 3Gb/s compatible
Form Factor 1U SATA DOM
Connector Type SATA (7 pin)
External DRAM Buffer No
Capacity SLC: 1GB / 2GB / 4GB / 8GB
MLC: 8GB / 16GB / 32GB / 64GB
Sequential R/W Performance SLC Read: 35MB/sec. (max.), Write: 28MB/sec. (max.)
MLC Read: 162 MB/sec. (max.), Write: 40 MB/sec. (max.)
Temperature Operating Temperature:
Standard Grade: 0°C ~ +70°C
Industrial Grade: -40°C ~ +85°C

Storage Temperature: -55°C to +95°C
TRIM Yes
S.M.A.R.T. Yes
Security Tool Yes
MTBF More than 2,000,000 hours.
Vibration (Operating) Test Conditions: 10Hz to 2K Hz, 20G, 3 axes
Reference Standards: IEC 68-2-6
Shock Test Conditions: Duration: 0.5ms, 1500G, 3 axes
Reference Standards: IEC 68-2-27
Dimension (LxWxH) 52.5*23*19.7mm
Weight 20 gram
Warranty SLC: 5 Year (Limited)
MLC: 3 Year (Limited)
Data rate -
Voltage +5V DC ± 5% 500mA (max.)
Package Industrial Standard Package
  • Embedded Application System
  • Industrial Fanless System
  • Digital Signage
  • Telecom system
  • Hard held device
  • Transportation
  • Medical & Healthcare
  • eHOME
  • Kiosk / POI
  • Surveillance
Name Download
ACPI_SATA_DOM_SDM0CU-V_with_Shell_Series_Datasheet-20170526 Download

P/N

CH

Capacity

Flash

Type

Temp

CDC001GRQ-F306A005

1CH

1GB

Toshiba

SLC

Normal Temp

CDC002GRQ-F406A005

1CH

2GB

CDC004GRQ-F506A006

1CH

4GB

CDC008GRQ-F606A006

1CH

8GB

CDI001GRQ-F306A005

1CH

1GB

Wide Temp

CDI002GRQ-F406A005

1CH

2GB

CDI004GRQ-F506A006

1CH

4GB

CDI008GRQ-F606A006

1CH

8GB

CDC008GRQ-G606A00C

1CH

8GB

Toshiba 15nm

MLC

Normal Temp

CDC016GRQ-G706A00C

1CH

16GB

CDC032GRQ-G806A00C

1CH

32GB